Positioning a client in bed is important for maintaining alignment and for preventing pressure injury, foot drop, and contractures (Perry et al., 2018). Proper positioning is also vital for providing comfort for clients who are bedridden or who have decreased mobility related to a medical condition or treatment. When positioning a client in bed, supportive devices such as pillows, rolls, wedges, and blankets, along with re-positioning, can aid in providing comfort and safety (Perry et al., 2018).

Positioning a client in bed is a common procedure in the hospital. There are various positions possible for clients in bed, which may be determined by their condition, preference, or treatment related to an illness. Table 8.3.1 identifies client positions in bed and a description for each.

Table 8.3.1 Client Positions in Bed

Position	Description
Supine position	Client lies flat on back. Additional supportive devices may be added for comfort, i.e., under lower legs, under head.
Prone position	Client lies on stomach with head turned to the side.
Lateral position	Client lies on the side of the body with the top leg over the bottom leg. This position helps relieve pressure on the coccyx.
Sims position	Client lies between supine and prone with legs flexed in front of the client. Arms should be comfortably placed beside the client, not underneath.
Fowler’s position	Client’s head of bed is placed at a 45-degree angle. Hips may or may not be flexed. This is a common position to provide client comfort and care.   high Fowler’s position is used to describe a client’s position where the upper body is positioned approximately 60 and 90 degrees in relation to the lower body.
Semi-Fowler’s position	Client’s head of bed is placed at a 30-degree angle. This position is used for clients who have cardiac or respiratory conditions, and for clients with a nasogastric tube and who have enteral nutrition.
Orthopneic or tripod position	Client sits at the side of the bed with head resting on an over-bed table on top of several pillows. This position is used for clients with breathing difficulties.
Trendelenburg position	Place the head of the bed lower than the feet. This position is used in situations such as hypotension and medical emergencies. It helps promote venous return to major organs such as the head and heart.
Data sources: Perry et al., 2018; Potter et al., 2017

Moving a Client Up in Bed

When moving a client in bed, perform a client risk assessment prior to the procedure to determine the level of assistance needed for optimal client care. If a client is unable to assist with repositioning in bed, follow agency policy regarding “no client lifts” and the use of mechanical lifts for complex and bariatric clients. See Checklist 8.3.1 for the steps to move a client up in bed.

	Steps	Additional Information
1.	Make sure an additional healthcare provider is available to help with the move.	This procedure requires two healthcare providers.
2.	Explain to the client what will happen and how the client can help.	Doing this provides the client with an opportunity to ask questions and help with the positioning.
3.	Complete risk assessment (Checklist 8.2.1) of client’s ability to help with the positioning.	This step prevents injury to client and healthcare provider.
4.	Raise bed to safe working height. The bed should be flat. Ensure brakes are applied. Healthcare providers stand on each side of the bed.	Principles of proper body mechanics help prevent MSI. Safe working height is at waist level of the shortest healthcare provider. Leaving the head of bed elevated increases effort required and increases risk of MSI.
5.	Lay client supine; place pillow at the head of the bed and against the headboard.	This step protects the head from accidentally hitting the headboard during repositioning.
6.	Stand between shoulders and hips of client with feet shoulder width apart. Weight will be shifted from back foot to front foot.	This keeps the heaviest part of the client closest to the centre of gravity of the healthcare providers.
7.	Fan-fold the draw sheet toward the client with palms facing up.	This provides a strong grip to move the client up using the draw sheet.
8.	Ask client to tilt head toward chest, fold arms across chest, and bend knees to assist with the movement. Let the client know when the move will happen.	This step prevents injury from client and prepares client for the move.
9.	Tighten your gluteal and abdominal muscles, bend your knees, and keep back straight and neutral.	The principles of proper body mechanics help prevent injury.
10.	On the count of three by the lead person, gently slide (not lift) the client up the bed, shifting your weight from the back foot to the front, keeping back straight with knees slightly bent.	The principles of proper body mechanics help prevent injury.
11.	Replace pillow under head, position client in bed, and cover with sheets.	This step promotes comfort and prevents harm to client.
12.	Lower bed, raise side rails as required, and ensure call bell is within reach. Perform hand hygiene.	Placing bed and side rails in safe positions reduces the likelihood of injury to client. Proper placement of call bell facilitates client’s ability to ask for assistance.   Hand hygiene reduces the spread of microorganisms.
	Data sources: Perry et al., 2018; PHSA, 2010

Now complete the following online courses to learn more about how to move a client up in bed.

Positioning a Client to the Side of the Bed

Prior to ambulating, re-positioning, or transferring a client from one surface to another (e.g., a stretcher to a bed), it may be necessary to move the client to the side of the bed to avoid straining or excessive reaching by the healthcare provider. Positioning the client to the side of the bed also allows the healthcare provider to have the client as close as possible to the healthcare provider’s centre of gravity for optimal balance during client handling. Checklist 8.3.2 describes how to safely move a client to the side of the bed.

	Steps	Additional Information
1.	Make sure you have as many additional healthcare providers as needed to help with the move.	The procedure works best with two or more healthcare providers, depending on the size of the client and the size of the healthcare professionals.
2.	Explain to the client what will happen and how the client can help.	This provides the client with an opportunity to ask questions and help with the positioning.
3.	Raise bed to safe working height and ensure that brakes are applied. Lay client supine.	Principles of proper body mechanics help prevent MSI. Safe working height is at waist level of the shortest healthcare provider.
4.	Stand on the side of the bed the client is moving toward. One person stands at the shoulder area and the other person stands near the hip area, with feet shoulder width apart.	This step keeps the heaviest part of the client closest to the centre of gravity of the healthcare providers.
5.	Fan-fold the draw sheet toward the client with palms facing up.	Fold sheet with fingers facing upward.
6.	Have the healthcare provider at the head of the bed grasp the pillow with one hand and the draw sheet with the other hand.	Grasp the pillow with one hand and the draw sheet with the other. This prevents injury to client.
7.	Have client place arms across chest.	Chin tucked-in and arms across chest. This step prevents injury to client.
8.	Tighten your gluteal and abdominal muscles, bend your knees, and keep back straight and neutral. Place one foot in front of the other. The weight will shift from the front foot to the back during the move.	Use of proper body mechanics helps prevent injury when handling clients.
9.	On the count of three by the lead person, with arms tight and shoulders down, shift your weight from the front foot to the back foot. Use your large leg muscles to move the client. Do not lift, but gently slide the client.	Start move with weight on front foot     Start move with weight on front foot.   If the client is bariatric, the move should be repeated to correctly position the client or use a mechanical lift.
10.	Once client is positioned toward the side of the bed, ensure pillow is comfortable under the head, and straighten sheets. Complete all other procedures related to safe client handling.	Raise side rails. This step promotes comfort and prevents harm to client.
11.	Lower bed, raise side rails as required, and ensure call bell is within reach. Perform hand hygiene.	Placing bed and side rails in safe positions reduces the likelihood of injury to client. Proper placement of call bell facilitates client’s ability to ask for assistance.   Hand hygiene reduces the spread of microorganisms.
	Data sources: Perry et al., 2018; PHSA, 2010